Home >> Atten Soldering station >> Atten AT852D Hot Air Rework Station
Atten AT852D Hot Air Rework Station
Atten AT852D	Hot Air Rework Station

Atten AT852D Hot Air Rework Station

Special price: [ US$100.00 ]

Atten AT852D Hot Air Rework Station

1.Sensor closed-loop circuit control, quick heating, easy to set temperature, remains constant temperature despite of air flow rate change.
2.The SMD rework station suits for de-soldering most of the SMD components, such as SOIC, CHIP, QFP, PLCC, BGA and so on
3. Amount of Wind: 1 to 8 Level (stepless regulation), 23L/min (MAX)
if you want to know wholesale discount price,please contact us by e-mail.

Note:
If your shipment is deliveyellow to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp

Atten AT850D Hot Air Rework Station Specifications:

 

The Atten AT852D is a hot-air de- / solder rework station with adjustable air flow and a 250 W heating element for a temperature range of 100 C Degree to 480 C Degree. The hot-air nozzles can be exchanged for optimal usage depending on the project.

Special Features

Power consumption: 550W
Input Voltage: 220VAC 50Hz?
Temperature range: 100C Degree -480C Degree
Display Mode: LED digital display
Air Pump Type: Diaphragm Type Air Pump
Amount of Wind: 1 to 8 Level (stepless regulation), 23L/min (MAX)
Noise: <52dBA
Size:224(L)X126(W)X110(H)mm
Weight: 3.2KG
Features:
Sensor closed-loop circuit control, quick heating, easy to set temperature, remains constant temperature despite of air flow rate change.
Anti-static design to protect PCB from static and voltage leakage.
The hot air station has new patent heater with fast warm up capability.
Intelligent cool system send cool wind after power off, and cut off power when temperature is less than 100 C Degree.
The SMD rework station suits for de-soldering most of the SMD components, such as SOIC, CHIP, QFP, PLCC, BGA and so on.
Sensor closed-loop control and microcomputer zero passing triggering temperature control, rapid temperature rise, and precise and steady.
Knob controller type thermoregulation and wind regulation,LED screen display,and simple and easy to operate.
The patented auger-type heating core results in quick temperature rise and much more prolonged service life.
The diaphragm type air pump design with large pressure can work with many types of spray nozzles.
The intelligent cooling system and the extension of air feeding time after shutdown protects the hot wind handgrip much more efficiently.

 

  • Sensor closed-loop circuit control
  • Quick heating
  • Easy to set temperature which remains constant
  • Antistatic design to protect PCB from static and voltage leakage
  • New patent heater
  • Intelligent cooling system, continues cooling after power off and cut off power if the temperature is less than 100 C Degree
  • Suitable for de-/soldering the most available SMD components, such as SOIC / SOP, QFP, PLCC, BGA and so on...
Specifications Packing list: Standard Packing:
Voltage:AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) Main Unit:1 Unit Inner box : 33x27.2x19.5(cm)
Power:50W Nozzles: 2 PCS N.W.: 3.8kg
Temperature range:100-480C Degree Gun Holder: 1 PCS G.W.: 4.2kg
Maximum Air Flow:23L /min AC Cord: 1 PCS Carton: 6 PCS/Carton
Air flow grades:A25-A99 Manual: 1 PCS Size: 56x35x61.5(cm)
Pump:diaphragm pump N.W.: 22.5kg
Noise:<52dB(A) G.W.: 23.8kg